DDR memory is designed to perform under the most demanding conditions. helps to improve response time, you can work with larger files, speeds up processing, internet surfing and emails run smoother especially in video and audio environments.
Upgrading your memory will pay for itself with all the time saved waiting for your current PC to perform tasks and can greatly increase the useful life of your PC for a fraction of the cost of buying a new system.
Kingston ValueRAM 1GB (1x1GB) 1333MHz DDR3 SDRAM Unbuffered Non-ECC CL9 DIMM MemoryPlease check that this memory is suitable for your system, before buying. You can match your system with the Kingston Memory Product finder at kingston.com Kingston ValueRAM delivers the same reputable, high-quality, Kingston memory modules you've known for years at competitive prices for the white box market. Kingston ValueRAM offers a broad line of modules for customers seeking the best cost/value memory.
A small outline dual inline memory module (SODIMM) consists of a number of memory components (usually black) that are attached to a printed circuit board (usually green). SODIMMs get their name because they are smaller and thinner than regular DIMMs. The gold pins on the bottom of the SODIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a SODIMM are not connected. 200-pin SODIMMs are used to provide DDR and DDR2 SDRAM memory for notebook computers. 200-pin SODIMMs are available in PC2700 DDR SDRAM, PC3200 DDR SDRAM, DDR2 PC2-6400 SDRAM, DDR2 PC2-5300 SDRAM, DDR2 PC2-4200 SDRAM and DDR2 PC2-3200 SDRAM. To use DDR or DDR2 memory, your system motherboard must have 200-pin SODIMM slots and a DDR- or DDR2-enabled chipset. A DDR or DDR2 SODIMM will not fit into a standard SDRAM SODIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory AdvisorTM tool.) The number of black components on a 200-pin SODIMM can vary, but it always has 100 pins on the front and 100 pins on the back, for a total of 200. 200-pin SODIMMs are approximately 2.625 inches long and 1.25 inches high, though the heights can vary. Like 144-pin SODIMMs, 200-pin SODIMMs have one small notch within the row of pins; however, the notch on the 200-pin SODIMMs is closer to the left side of the module.
The JM1600KLN-2G is a 256M x 64bits DDR3-1600 unbuffered DIMM. The JM1600KLN-2G consists of 8pcs 256Mx8bits DDR3 SDRAMs in FBGA packages and a 2048 bits serial EEPROM on a 240-pin printed circuit board. The JM1600KLN-2G is a Dual In-Line Memory Module and is intended for mounting into 240-pin edge connector sockets. Synchronous design allows precise cycle control with the use of system clock. Data I/O transactions are possible on both edges of DQS. Range of operation frequencies, programmable latencies allow the same device to be useful for a variety of high bandwidth, high performance memory system applications.
ValueRAM's KVR533D2N4/1G is a 128M x 64-bit (1GB) DDR533 CL4 SDRAM (Synchronous DRAM) memory module The components on this module include sixteen 64M x 8-bit (16M x 8-bit x 4 Bank) DDR533 SDRAM in FBGA packages This 240-pin DIMM uses gold contact fingers and requires +18V Product Description Kingston ValueRAM memory - 1 GB - DIMM 240-pin - DDR2 Storage Capacity 1 GB Upgrade Type Generic Technology DDR2 SDRAM Form Factor DIMM 240-pin