Atlas DCA - Semiconductor Analyser ( Component Analyser )

Designed and manufactured in the UK Automatic pinout detection and identification connect any way round Automatic part type identification Supports semiconductors including transistors MOSFETs diodes LEDs JFETs and much more Detection of special component features such as transistors with diodes or transistors with built-in resistors Transistor gain measurement Transistor leakage measurement more info >> MOSFET gate threshold measurement Semiconductor voltage drop measurement Supplied with gold plated redgreenblue universal hook probes Designed and manufactured in the UK Connect any way round to automatically identify and measure a wide range of semiconductor devices. The DCA55 will automatically identify the type of the part pinout and many component parameters. Components supported include bipolar NPNPNP transistors darlingtons diode-protected transistors transistors with built-in resistors enhancement mode MOSFETs depletion mode MOSFETs diodes diode networks LEDs 2 and 3 lead bicolour LEDs JFETs and many more. Further measurements are displayed including transistor gain leakage current pn voltage drops LED voltages MOSFET threshold voltages and much more. Even if you dont know anything about the part just connect it in any configuration and the DCA55 will identify the type of part for you and also identify all the leads. Supplied with universal gold plated hook probes battery and illustrated user guide. Not designed for in-circuit testing.

<< hide info

• Maplin Electronics

• Brand:

  Peak Electronic Design

analyser atlas component dca semiconductor

Peak Atlas IT Network Cable Analyser ( Network Cable Tester )

Designed and manufactured in the UK Automatic identification of patch cables straight through and cross-over cables PC to PC links or hub to hub links and token ring cables Fault identification and highlighting for shorted lines open lines and swapped lines Supplied with leads to allow testing of sockets as well as cables Clear user-friendly scrollable display Support for up to 150 metres of more info >> cable Designed and manufactured in the UK Handheld network cable analyser for testing RJ45 Cat55e6 style network cabling. Connect the Atlas IT cable analyser at one end of your cabling and one of the supplied terminators to the other end. The Atlas IT will then analyse all the lines from one end to the other and identify the connection pattern such as straight-through crossover token-ring voicedata and many more types. Any wiring faults are clearly displayed including breaks shorts or swaps. Mini patch cables are also included to enable the testing of RJ45 sockets and their associated cabling. The Atlas IT is compatible with optional Identified terminators allowing for the easy analysis and identification of multiple cable runs. Suitable for Cat 5 Cat 5e and Cat 6 cabling with RJ45 style plugs or sockets shielding not tested. A full colour Ethernet connection chart is included in the user guide. Supplied in a tough padded carry case spare battery 2 terminators 2 patch cables and a user guide. Space is provided in the carry case for up to 24 identified terminators. This instrument does not measure the connection speed capability or cable length.

<< hide info

• Maplin Electronics

• Brand:

  Peak Electronic Design

analyser atlas cable network peak tester

ID Terminators for Atlas IT Network Cable Tester ( ID Terminators 1-8 )

Pack of 8 terminators for the Peak Atlas IT cable tester order code RS67X You can analyse and identify lots of cables without needing to make trips to swap terminators Requires Atlas IT cable tester with firmware revision 2 or later earlier units can be updated by contacting Peak Electronic These ID Terminators provide all the existing functions of cable type identification and fault detection more info >> in addition to cable-run identification Designed and manufactured in the UK Identified terminators are ideal when testing multiple cable runs with the Atlas IT Network Cable Analyser UTP05. As well as the standard cable type identification and connection pattern identification the identified terminators also enable the identity number of a cable run to be displayed on the Atlas ITs display. Simple the use the identified terminator in exactly the same way as the standard terminators the identity is automatically recognised by the Atlas IT and displayed along with the connection details. Supplied as a set of 8 terminators

<< hide info

• Maplin Electronics

• Brand:

  Peak Electronic Design

• Delivery-time:

  1 Day

atlas cable id network terminators tester

Atlas DCA - Semiconductor Analyser Component Analyser

Designed and manufactured in the UKAutomatic pinout detection and identification connect any way roundAutomatic part type identificationSupports semiconductors including transistors MOSFETs diodes LEDs JFETs and much moreDetection of special component features such as transistors with diodes or transistors with built-in resistorsTransistor gain measurementTransistor leakage measurementMOSFET gate more info >> threshold measurementSemiconductor voltage drop measurementSupplied with gold plated redgreenblue universal hook probesDesigned and manufactured in the UK Connect any way round to automatically identify and measure a wide range of semiconductor devices. The DCA55 will automatically identify the type of the part pinout and many component parameters. Components supported include bipolar NPNPNP transistors darlingtons diode-protected transistors transistors with built-in resistors enhancement mode MOSFETs depletion mode MOSFETs diodes diode networks LEDs 2 and 3 lead bicolour LEDs JFETs and many more. Further measurements are displayed including transistor gain leakage current pn voltage drops LED voltages MOSFET threshold voltages and much more. Even if you dont know anything about the part just connect it in any configuration and the DCA55 will identify the type of part for you and also identify all the leads. Supplied with universal gold plated hook probes battery and illustrated user guide. Not designed for in-circuit testing.

<< hide info

• Maplin

• Brand:

  Peak Electronic Design

analyser atlas component dca semiconductor

Peak Atlas IT Network Cable Analyser Network Cable Tester

Designed and manufactured in the UKAutomatic identification of patch cables straight through and cross-over cables PC to PC links or hub to hub links and token ring cablesFault identification and highlighting for shorted lines open lines and swapped linesSupplied with leads to allow testing of sockets as well as cablesClear user-friendly scrollable displaySupport for up to 150 metres of cableDesigned more info >> and manufactured in the UK Handheld network cable analyser for testing RJ45 Cat55e6 style network cabling. Connect the Atlas IT cable analyser at one end of your cabling and one of the supplied terminators to the other end. The Atlas IT will then analyse all the lines from one end to the other and identify the connection pattern such as straight-through crossover token-ring voicedata and many more types. Any wiring faults are clearly displayed including breaks shorts or swaps. Mini patch cables are also included to enable the testing of RJ45 sockets and their associated cabling. The Atlas IT is compatible with optional Identified terminators allowing for the easy analysis and identification of multiple cable runs. Suitable for Cat 5 Cat 5e and Cat 6 cabling with RJ45 style plugs or sockets shielding not tested. A full colour Ethernet connection chart is included in the user guide. Supplied in a tough padded carry case spare battery 2 terminators 2 patch cables and a user guide. Space is provided in the carry case for up to 24 identified terminators. This instrument does not measure the connection speed capability or cable length.

<< hide info

• Maplin

• Brand:

  Peak Electronic Design

analyser atlas cable network peak tester

ID Terminators for Atlas IT Network Cable Tester ID Terminators 1-8

Pack of 8 terminators for the Peak Atlas IT cable tester order code RS67XYou can analyse and identify lots of cables without needing to make trips to swap terminatorsRequires Atlas IT cable tester with firmware revision 2 or later earlier units can be updated by contacting Peak ElectronicThese ID Terminators provide all the existing functions of cable type identification and fault detection in addition more info >> to cable-run identificationDesigned and manufactured in the UK Identified terminators are ideal when testing multiple cable runs with the Atlas IT Network Cable Analyser UTP05. As well as the standard cable type identification and connection pattern identification the identified terminators also enable the identity number of a cable run to be displayed on the Atlas ITs display. Simple the use the identified terminator in exactly the same way as the standard terminators the identity is automatically recognised by the Atlas IT and displayed along with the connection details. Supplied as a set of 8 terminators

<< hide info

• Maplin

• Brand:

  Peak Electronic Design

• Delivery-period:

  1

atlas cable id network terminators tester

Atlas SCR Thyristor and Triac Analyser Atlas SCR Analyser

Automatic pinout detection and identification connect any way roundAutomatic TriacThyristor detectionGenerates gate currents from 100andmicroA up to 90mAGate sensitivity category displayedConstant load test of 12V at 100mA regardless of battery conditionSupplied with gold plated redgreenblue universal hook probesDesigned and manufactured in the UK The Atlas SCR is specifically designed to automatically more info >> analyse a wide range of Triacs and Thyristors SCRs. Connect the part any way round and press test. The part type is identified Triac or Thyristor the pinout is identified and the gate sensitivity is displayed in 1 of 9 sensitivity categories as well as gate voltage. Suitable for parts that require a gate trigger current from less than 100andmicroA up to 90mA. Load tests are performed with an internally generated load of 12V at 100mA all from a single AAA alkaline battery supplied. Not designed for in-circuit use.

<< hide info

• Maplin

• Brand:

  Peak Electronic Design

analyser atlas scr thyristor triac

Atlas ESR60 - Equivalent Series Resistance Meter and Capacitor Analyser Atlas ESR60 Meter

Automatic capacitor discharge functionMeasure both capacitance and ESR equivalent series resistanceCan be used for measuring low resistances such as short tracingCapacitance range from 1andmicroF to 22000andmicroFESR range from 0.01andohm to 20.0andohmGold plated 2mm plugs and socketsGold plated removable croc clipsDesigned and manufactured in the UK Measuring a capacitors ESR equivalent series resistance more info >> is a great indicator of capacitor condition. The Atlas ESR offers instant results just connect the probes and press test. You can even use the Atlas ESR in-circuit saving you the trouble of removing capacitors. When testing capacitors out-of-circuit the unit will also display the capacitance.brbrTraditionally ESR can be a tricky thing to measure which is a shame its a very useful diagnostic parameter. Of course ESR meters are available from various sources some are very famous in the repair sector but the Atlas ESR is more than just another ESR meter. For a start its smart both in looks and in brain. It can measure and compensate for the effects of measuring in-circuit it also knows that you dont want to be hassled with capacitor polarity.brbrIts designed with the real world in mind. Some capacitors can be charged up a lot but the Atlas ESR doesnt mind. If your capacitor is charged the unit will automatically carry out a controlled discharge procedure before measuring the capacitance and ESR.br

<< hide info

• Maplin

• Brand:

  Peak Electronic Design

• Delivery-period:

  1

analyser atlas capacitor equivalent esr60 meter resistance series

Hercules XPS 2.0 40 Speakers Slim 4780593

MIP-GUI4768163

2.0 speakers with Slim, exclusive design: refined and incredibly stylishSpecially designed electronics for the slimmest satellites, with the most elegant lookTotal power: 5 watts RMS (2 x 2.5W RMS), peak power: 10 wattsSpeakers are magnetically shielded so as not to disturb your surroundingsHeadphone jack and secondary line input on the wired remote control

• Retailer:

  24-7 Electrical

hercules slim speakers xps

Sealey Digital Electronic 3/8" Square Drive 27 - 135Nm Torque Wrench

Rugged and resilient digital torque wrench suitable for workshop and factory use. LCD read-out with LED/audible alarm indicates achieved and target torque levels. Preset desired torque levels or track peak and working torques using simple push-button...

• Retailer:

  Tooled-up

135nm digital electronic sealey square torque wrench

Sealey 1/2" Square Drive Digital Electronic Torque Wrench 40-200Nm

Rugged and resilient digital torque wrenches suitable for workshop and factory use. LCD read-out with LED/audible alarm indicates achieved and target torque levels. Track peak and working torques using simple push-button menu. Selectable read-out in ...

• Retailer:

  Tooled-up

200nm digital electronic sealey square torque wrench

Banner Pilot - Resignation Day

Free Delivery at hmv.com

Buy Banner Pilot - Resignation Day from HMV.com for only £8.99 delivered! Banner Pilot - Resignation Day is usually dispatched in 24 hours.

• Retailer:

  Hmv

banner pilot resignation

Minuteman - Resigned To Life

Free Delivery at hmv.com

Buy Minuteman - Resigned To Life from HMV.com for only £7.99 delivered! Minuteman - Resigned To Life is usually dispatched in 24 hours.

• Retailer:

  Hmv

life minuteman resigned

ID Tech uSign 200 Signature Capture Pad - Serial Interface

ID TECH's uSign 200 is an electronic signature capture device with graphic LCD and signature panel. uSign provides enhanced compliance with eSignature legislation and increased signature security with superior ergonomic design for ease-of-use and real-time signature quality. The interactive mode lets customers select and navigate transactions with just the stylus pen. The signature is compressed more info >> and provided to a host system for signature and data storage. uSign is ideal for retail, hospitality, self-service and quick service restaurants...etc. It also comes with a metal mounting plate, which provides the uSign with a mounting option. A removable overlay on the uSign's display covers and protects the signature area, allowing replacement when the signature area becomes worn from stylus use. Features: Replaceable tethered stylus, non-electronic Resistive touch pad with transparent, replaceable protective overlay Electronic signature capture with buffered signature capability Sampling rate up to 190 dots per second; 1024 dot/inch resolution Real time signature capture with 5:1 compression Raw data output available firmware filters spikes and provides smoothing Graphics display of signature during capture Host controlled graphics display when not in signature process Calibration mode or function Command and response driven operations through and API Demo application runs in Windows 2000 and XP

<< hide info

• Retailer:

  Ebuyer

capture id interface pad serial signature tech usign

Gigabyte GK-K6800 - Keyboard - USB - glossy black

Gigabyte GK-K6800 is an attractive keyboard designed especially for seeking trendsetting users. Fashion and contemporary design of outlook is perfectly for any working space. Interface USB Key Count 103/104/105/106/108 keys Function keys 14keys Switch Type Membrane Switch life 5~10 million times Travel distance 3.5 ± 0.2mm Travel to peak 2.5 ± 0.2mm Peak force 55 ± 7gf Operating temperature -5oC more info >> to 40oC Operating humidity 35% to 85 % non condensing at 40oC Electronic data Input Voltage = 5 V ± 5 % Input Current = 500 mA max Color Glossy Black Weight 854g Dimension 467(L)x205(W)x31.2(H) mm Certification CE, FCC, BSMI Support OS Windows 98/2000/ME/XP 32bit Vista/Win7 32/64bit

<< hide info

• Retailer:

  Ebuyer

black gigabyte gk glossy k6800 keyboard usb

ID Terminators for Atlas IT Network Cable Tester ( ID Terminators 1-8 )

Pack of 8 terminators for the Peak Atlas IT cable tester order code RS67X You can analyse and identify lots of cables without needing to make trips to swap terminators Requires Atlas IT cable tester with firmware revision 2 or later earlier units can be updated by contacting Peak Electronic These ID Terminators provide all the existing functions of cable type identification and fault detection more info >> in addition to cable-run identification Designed and manufactured in the UK Identified terminators are ideal when testing multiple cable runs with the Atlas IT Network Cable Analyser UTP05. As well as the standard cable type identification and connection pattern identification the identified terminators also enable the identity number of a cable run to be displayed on the Atlas ITs display. Simple the use the identified terminator in exactly the same way as the standard terminators the identity is automatically recognised by the Atlas IT and displayed along with the connection details. Supplied as a set of 8 terminators

<< hide info

• Retailer:

  Maplin Electronics

atlas cable id network terminators tester

ID Terminators for Atlas IT Network Cable Tester ID Terminators 1-8

Pack of 8 terminators for the Peak Atlas IT cable tester order code RS67XYou can analyse and identify lots of cables without needing to make trips to swap terminatorsRequires Atlas IT cable tester with firmware revision 2 or later earlier units can be updated by contacting Peak ElectronicThese ID Terminators provide all the existing functions of cable type identification and fault detection in addition more info >> to cable-run identificationDesigned and manufactured in the UK Identified terminators are ideal when testing multiple cable runs with the Atlas IT Network Cable Analyser UTP05. As well as the standard cable type identification and connection pattern identification the identified terminators also enable the identity number of a cable run to be displayed on the Atlas ITs display. Simple the use the identified terminator in exactly the same way as the standard terminators the identity is automatically recognised by the Atlas IT and displayed along with the connection details. Supplied as a set of 8 terminators

<< hide info

• Retailer:

  Maplin

atlas cable id network terminators tester

XPS 2.0 40 Slim Speakers, Black

Black

Exclusive design: refined and incredibly stylish. Specially designed electronics for the slimmest satellites with the most elegant look. Total power: 5 watts RMS (2 x 2.5W RMS). Peak power: 10 watts. Speakers are magnetically shielded so as not to disturb your surroundings. Headphone jack and secondary line input on the wired remote control. Integrated power supply. Black lacquered finish. Highquality more info >> speaker grille fabric on satellites front face. Satellite dimensions: 23.5cm (height) x 5.8cm (width) x 7.2cm (depth). 1.8 meter cable to connect to audio source. Product meets RoHS standards << hide info

• Retailer:

  Littlewoods

black slim speakers xps

Hercules XPS 2.0 40 Slim Speakers, Black

Black

Exclusive design: refined and incredibly stylish. Specially designed electronics for the slimmest satellites with the most elegant look. Total power: 5 watts RMS (2 x 2.5W RMS). Peak power: 10 watts. Speakers are magnetically shielded so as not to disturb your surroundings. Headphone jack and secondary line input on the wired remote control. Integrated power supply. Black lacquered finish. Highquality more info >> speaker grille fabric on satellites front face. Satellite dimensions: 23.5cm (height) x 5.8cm (width) x 7.2cm (depth). 1.8 meter cable to connect to audio source. Product meets RoHS standards << hide info

• Retailer:

  Very.co.uk

black hercules slim speakers xps

XPS 2.0 40 Slim Speakers, Black

Black

Exclusive design: refined and incredibly stylish. Specially designed electronics for the slimmest satellites with the most elegant look. Total power: 5 watts RMS (2 x 2.5W RMS). Peak power: 10 watts. Speakers are magnetically shielded so as not to disturb your surroundings. Headphone jack and secondary line input on the wired remote control. Integrated power supply. Black lacquered finish. Highquality more info >> speaker grille fabric on satellites front face. Satellite dimensions: 23.5cm (height) x 5.8cm (width) x 7.2cm (depth). 1.8 meter cable to connect to audio source. Product meets RoHS standards << hide info

• Retailer:

  Woolworths.co.uk

black slim speakers xps

Weller El60/40-100 Electronic Solder Resin Core

1 mm diameter Electronic Solder with resin core.

Weight 100grm

• Retailer:

  Tooled-up

core el60 electronic resin solder weller

PEAK 4GB MICRO SDHC

• Retailer:

  Pc World Business

4gb micro peak sdhc

PEAK 8GB MICRO SDHC

• Retailer:

  Pc World Business

8gb micro peak sdhc

PEAK 16GB SDHC CARD

• Retailer:

  Pc World Business

16gb card peak sdhc

PEAK 16GB MICRO SDHC

• Retailer:

  Pc World Business

16gb micro peak sdhc