AcoustiFan DustProof 120mm Case Fan

**AcoustiFan™ DustPROOF - Premium Quality Quiet 120mm Multi-Purpose Cooling Fan** The fan motor for the DustPROOF range of virtually silent fans is extremely quiet. The AcoustiFan™ DustPROOF series use the highest quality double-ball bearings available for reliability, use-anywhere inside a PC for extra long life expectancy (upgrade your PC and take these fans with you!). One of the unique more info >> features of these PC fans is that the motor has been completely sealed from the outside environment. This prevents dust entering the motor and also reduces the amount of noise perceived to be coming from the bearings within the motor. Each DustPROOF™ quiet fan is also supplied with a unique 3-speed fan cable which offers maximum flexibility (3-pin or 4-pin power connectors), along with the ability to select a fan speed suitable for your PC and noise sensitivity. The black connector will run your fan at full speed (12V), the blue connector will run the fan at medium speed (7.5V), and the white connector will run it at minimum speed (5V). However, if you opt for the white connector (minimum fan speed), be certain to design the airflow through your PC system carefully and monitor system and component temperatures. Acousti have even included four handy cable ties with each DustPROOF™ fan! The DustPROOF™ quiet fans also incorporate an Auto Start safety feature. This feature is built into the fan's PCB and automatically restarts the fan after the release of any obstacle which has prevented the blades from spinning.

<< hide info

• Bt Shop

• Brand:

  Acousti

• Delivery Cost:

  £1.99

120mm acoustifan case dustproof fan

AcoustiFan DustProof 80mm Case Fan

**AcoustiFan™ DustPROOF - Premium Quality Quiet 80mm Multi-Purpose Cooling Fan** The fan motor for the DustPROOF range of virtually silent fans is extremely quiet. The AcoustiFan™ DustPROOF series use the highest quality double-ball bearings available for reliability, use-anywhere inside a PC for extra long life expectancy (upgrade your PC and take these fans with you!). One of the unique more info >> features of these PC fans is that the motor has been completely sealed from the outside environment. This prevents dust entering the motor and also reduces the amount of noise perceived to be coming from the bearings within the motor. Each DustPROOF™ quiet fan is also supplied with a unique 3-speed fan cable which offers maximum flexibility (3-pin or 4-pin power connectors), along with the ability to select a fan speed suitable for your PC and noise sensitivity. The black connector will run your fan at full speed (12V), the blue connector will run the fan at medium speed (7.5V), and the white connector will run it at minimum speed (5V). However, if you opt for the white connector (minimum fan speed), be certain to design the airflow through your PC system carefully and monitor system and component temperatures. Acousti have even included four handy cable ties with each DustPROOF™ fan! The DustPROOF™ quiet fans also incorporate an Auto Start safety feature. This feature is built into the fan's PCB and automatically restarts the fan after the release of any obstacle which has prevented the blades from spinning.

<< hide info

• Bt Shop

• Brand:

  Acousti

• Delivery Cost:

  £4.27

80mm acoustifan case dustproof fan

AcoustiFan 120mm Anti-Vibration Fan Gasket

These super-soft silicone fan gaskets are designed to dramatically reduce the vibration from any PC or server case cooling fans. The 80mm, 92mm and 120mm sizes are 2.5mm thick. Included with each gasket are silicone washers and anti-vibration screws. These screws feature a thread design which prevents the shank touching the fan and vibrations being transmitted and amplified through to the chassis. more info >> These gaskets are suitable for the vast majority of case designs and fan combinations, as they fit standard fan mounting holes. Slightly lengthened (12mm thread) fan mounting screws are supplied with the fan gaskets and washers. These gaskets can be used with standard PC cooling fans, and not just with AcoustiFan™ quiet case fans. Note: Do not use these gaskets in very high temperature locations inside a PC/Server such as attached to CPU or GPU heat sinks! **Fitting instructions** 1.Fit the fan gasket onto the outside of the fan housing (it will stay on the fan) 2.Position the fan and gasket together against the inside of the case, so that the four mounting holes in the fan and gasket line up to the mounting holes in the case side 3.Locate the four silicone washers and screws, and fit the washers against the case side, each secured by a screw 4.Tighten the screws enough to very slightly compress the silicone rubber. Do not overtighten. **Features** 1.Help to absorb the fan vibration 2.Help to 'seal' the small gap between the fan and the casing/enclosure wall 3.Compatible with virtually all case cooling fans 4.Supplied with screws and silicone washers 5.Quick and very easy to fit

<< hide info

• Bt Shop

• Brand:

  Acousti

• Delivery Cost:

  £1.99

120mm acoustifan anti fan gasket vibration

AcoustiFan 80mm Anti-Vibration Fan Gasket

These super-soft silicone fan gaskets are designed to dramatically reduce the vibration from any PC or server case cooling fans. The 60 and 70mm gaskets are 1.5mm thick, and the larger sizes are 2.5mm thick. Included with each gasket are silicone washers and anti-vibration screws. These screws feature a thread design which prevents the shank touching the fan and vibrations being transmitted and amplified more info >> through to the chassis. These gaskets are suitable for the vast majority of case designs and fan combinations, as they fit standard fan mounting holes. Slightly lengthened (12mm thread) fan mounting screws are supplied with the fan gaskets and washers. These gaskets can be used with standard PC cooling fans, and not just with AcoustiFan™ quiet case fans. Note: Do not use these gaskets in very high temperature locations inside a PC/Server such as attached to CPU or GPU heat sinks! **Fitting instructions** 1.Fit the fan gasket onto the outside of the fan housing (it will stay on the fan) 2.Position the fan and gasket together against the inside of the case, so that the four mounting holes in the fan and gasket line up to the mounting holes in the case side 3.Locate the four silicone washers and screws, and fit the washers against the case side, each secured by a screw 4.Tighten the screws enough to very slightly compress the silicone rubber. Do not overtighten. **Features** 1.Help to absorb the fan vibration 2.Help to 'seal' the small gap between the fan and the casing/enclosure wall 3.Compatible with virtually all case cooling fans 4.Supplied with screws and silicone washers 5.Quick and very easy to fit

<< hide info

• Bt Shop

• Brand:

  Acousti

• Delivery Cost:

  £1.99

80mm acoustifan anti fan gasket vibration

Acousti Ultra-Soft Arrowhead Fan Mounts - 8 Pack

#Help to eliminate every last dB of PC noise by reducing the noise generated by fan vibrations! **Why are Fan Mounts Necessary?** Vibration from fan motors can travel into a PC case and become amplified when a fan is screwed tightly to the chassis. This unwanted noise is 'vibrational' or 'secondary', and it is an issue if you wish to build a very quiet or virtually silent PC. more info >> These mounts have been designed & uniquely produced by Acousti Products 'from the drawing-board' specifically to tackle fan-induced vibrational noise! Ultra-Soft Fan Mounts are a 'no-vibration' alternative to standard fan screws or hard plastic push pins. To prevent the transmission of vibrations from a motor (such as a fan motor), the vibrating part needs to be decoupled (or disengaged) from the chassis or case, and the vibrations need to be damped (that is, attenuated). We have selected a ultra-soft silicone polymer that effectively decouples the fan from the case, and also attenuates unwanted vibration. The 3-dimensional shape of a fan mount is intimately related to the mount material. A fan mount must be soft enough to be effective but also designed to securely hold a fan in position. Acousti Products have designed both the shape and materials together to give a widely compatible fan mount that is also the very softest and most effective available! **Why are these Mounts any better than Others?** We have chosen an ultra-soft silicone polymer because it is softer and more chemically stable than cheaper and inferior alternatives like rubber or EPDM. Cheaper alternatives can leach oils and tend to degrade more readily over time - they also tend to be more reactive with some plastics (wires etc.) than silicone. Silicone is non-toxic, more chemically stable, and can also tolerate higher temperatures - so it is a superior material for this particular use. AFM02 and AFM03B Ultra-Soft Fan Mount Design. The fan mount has been designed with smoothed corners to prevent the pr

<< hide info

• Bt Shop

• Brand:

  Acousti

• Delivery Cost:

  £1.99

acousti arrowhead fan mounts pack soft ultra

AcoustiFeet Anti-Vibration Feet Black Very Soft

#Vibration-absorbing Low Profile Soft Feet **Anti-vibration Replacement Soft Feet (Pack of 4)** A great deal of PC case feet are solid plastic, or (at best) very hard rubber and therefore do a good job of transmitting unwanted vibrations from inside a PC via the chassis/case into the desk, floor or shelf on which the system sits. In this situation, where the case is in direct contact with the more info >> substrate, the PC can generate annoying noise elsewhere (secondary noise). We have designed a unique set of 4 self-adhesive soft silicone feet (UK Reg Design Applied), of varying softness (for different case weights). These case feet are designed to decouple a PC case from the floor or substrate by absorbing vibrational energy, and therefore helping to minimise noise generation caused by vibrations. A little extreme? Well, yes, perhaps: but even with the very quietest PCs it is vibration that becomes the most significant culprit/contributor to noise generation. So we have developed these case feet to try and minimise vibrations in our pursuit of 'ultimate noise reduction'. We hope you enjoy the difference! **Multiple Applications** Antivibration case feet are not just limited to combating PC noise and for vibration control in their application - they may be useful for Inkjet and Laser Printers, HiFi Separates, TVs, Small Form Factor PCs, Home Theatre PCs, and any number of appliances and enclosures that would benefit from vibration adsorption and reduction. Speaker cabinets may also be a useful application for these feet - helping to isolate the speaker cabinet from the surface on which it sits. **Available in 4 Different Softnesses:** * Light weight PC & SFF PC cases, HTPC cases, vibrating HiFi units, TV and home cable set top boxes, small speaker cabinets, inkjet printers etc. 8Kg (2.0Kg per foot) ACF3007-15B Matt Black Shore A 15° * Medium-to-light weight PCs, solid SFF cases, heavy HTPC cases, larger inkjet printers and laser printers, heav

<< hide info

• Bt Shop

• Brand:

  Acousti

• Delivery Cost:

  £1.99

acoustifeet anti black feet soft vibration

AcoustiFeet Anti-Vibration Feet Black Soft

#Vibration-absorbing Low Profile Soft Feet **Anti-vibration Replacement Soft Feet (Pack of 4)** A great deal of PC case feet are solid plastic, or (at best) very hard rubber and therefore do a good job of transmitting unwanted vibrations from inside a PC via the chassis/case into the desk, floor or shelf on which the system sits. In this situation, where the case is in direct contact with the more info >> substrate, the PC can generate annoying noise elsewhere (secondary noise). We have designed a unique set of 4 self-adhesive soft silicone feet (UK Reg Design Applied), of varying softness (for different case weights). These case feet are designed to decouple a PC case from the floor or substrate by absorbing vibrational energy, and therefore helping to minimise noise generation caused by vibrations. A little extreme? Well, yes, perhaps: but even with the very quietest PCs it is vibration that becomes the most significant culprit/contributor to noise generation. So we have developed these case feet to try and minimise vibrations in our pursuit of 'ultimate noise reduction'. We hope you enjoy the difference! **Multiple Applications** Antivibration case feet are not just limited to combating PC noise and for vibration control in their application - they may be useful for Inkjet and Laser Printers, HiFi Separates, TVs, Small Form Factor PCs, Home Theatre PCs, and any number of appliances and enclosures that would benefit from vibration adsorption and reduction. Speaker cabinets may also be a useful application for these feet - helping to isolate the speaker cabinet from the surface on which it sits. **Available in 4 Different Softnesses:** * Light weight PC & SFF PC cases, HTPC cases, vibrating HiFi units, TV and home cable set top boxes, small speaker cabinets, inkjet printers etc. 8Kg (2.0Kg per foot) ACF3007-15B Matt Black Shore A 15° * Medium-to-light weight PCs, solid SFF cases, heavy HTPC cases, larger inkjet printers and laser printers, heav

<< hide info

• Bt Shop

• Brand:

  Acousti

• Delivery Cost:

  £1.99

acoustifeet anti black feet soft vibration

AcoustiFeet Anti-Vibration Feet Black Firm

#Vibration-absorbing Low Profile Soft Feet **Anti-vibration Replacement Soft Feet (Pack of 4)** A great deal of PC case feet are solid plastic, or (at best) very hard rubber and therefore do a good job of transmitting unwanted vibrations from inside a PC via the chassis/case into the desk, floor or shelf on which the system sits. In this situation, where the case is in direct contact with the more info >> substrate, the PC can generate annoying noise elsewhere (secondary noise). We have designed a unique set of 4 self-adhesive soft silicone feet (UK Reg Design Applied), of varying softness (for different case weights). These case feet are designed to decouple a PC case from the floor or substrate by absorbing vibrational energy, and therefore helping to minimise noise generation caused by vibrations. A little extreme? Well, yes, perhaps: but even with the very quietest PCs it is vibration that becomes the most significant culprit/contributor to noise generation. So we have developed these case feet to try and minimise vibrations in our pursuit of 'ultimate noise reduction'. We hope you enjoy the difference! **Multiple Applications** Antivibration case feet are not just limited to combating PC noise and for vibration control in their application - they may be useful for Inkjet and Laser Printers, HiFi Separates, TVs, Small Form Factor PCs, Home Theatre PCs, and any number of appliances and enclosures that would benefit from vibration adsorption and reduction. Speaker cabinets may also be a useful application for these feet - helping to isolate the speaker cabinet from the surface on which it sits. **Available in 4 Different Softnesses:** * Light weight PC & SFF PC cases, HTPC cases, vibrating HiFi units, TV and home cable set top boxes, small speaker cabinets, inkjet printers etc. 8Kg (2.0Kg per foot) ACF3007-15B Matt Black Shore A 15° * Medium-to-light weight PCs, solid SFF cases, heavy HTPC cases, larger inkjet printers and laser printers, heav

<< hide info

• Bt Shop

• Brand:

  Acousti

• Delivery Cost:

  £1.99

acoustifeet anti black feet firm vibration

AcoustiFeet Anti-Vibration Feet Black Firm

#Vibration-absorbing Low Profile Soft Feet **Anti-vibration Replacement Soft Feet (Pack of 4)** A great deal of PC case feet are solid plastic, or (at best) very hard rubber and therefore do a good job of transmitting unwanted vibrations from inside a PC via the chassis/case into the desk, floor or shelf on which the system sits. In this situation, where the case is in direct contact with the more info >> substrate, the PC can generate annoying noise elsewhere (secondary noise). We have designed a unique set of 4 self-adhesive soft silicone feet (UK Reg Design Applied), of varying softness (for different case weights). These case feet are designed to decouple a PC case from the floor or substrate by absorbing vibrational energy, and therefore helping to minimise noise generation caused by vibrations. A little extreme? Well, yes, perhaps: but even with the very quietest PCs it is vibration that becomes the most significant culprit/contributor to noise generation. So we have developed these case feet to try and minimise vibrations in our pursuit of 'ultimate noise reduction'. We hope you enjoy the difference! **Multiple Applications** Antivibration case feet are not just limited to combating PC noise and for vibration control in their application - they may be useful for Inkjet and Laser Printers, HiFi Separates, TVs, Small Form Factor PCs, Home Theatre PCs, and any number of appliances and enclosures that would benefit from vibration adsorption and reduction. Speaker cabinets may also be a useful application for these feet - helping to isolate the speaker cabinet from the surface on which it sits. **Available in 4 Different Softnesses:** * Light weight PC & SFF PC cases, HTPC cases, vibrating HiFi units, TV and home cable set top boxes, small speaker cabinets, inkjet printers etc. 8Kg (2.0Kg per foot) ACF3007-15B Matt Black Shore A 15° * Medium-to-light weight PCs, solid SFF cases, heavy HTPC cases, larger inkjet printers and laser printers, heav

<< hide info

• Dabs

• Brand:

  Acousti

• Delivery Cost:

  £4.27

acoustifeet anti black feet firm vibration

AcoustiFan DustProof 120mm Case Fan

**AcoustiFan™ DustPROOF - Premium Quality Quiet 120mm Multi-Purpose Cooling Fan** The fan motor for the DustPROOF range of virtually silent fans is extremely quiet. The AcoustiFan™ DustPROOF series use the highest quality double-ball bearings available for reliability, use-anywhere inside a PC for extra long life expectancy (upgrade your PC and take these fans with you!). One of the unique more info >> features of these PC fans is that the motor has been completely sealed from the outside environment. This prevents dust entering the motor and also reduces the amount of noise perceived to be coming from the bearings within the motor. Each DustPROOF™ quiet fan is also supplied with a unique 3-speed fan cable which offers maximum flexibility (3-pin or 4-pin power connectors), along with the ability to select a fan speed suitable for your PC and noise sensitivity. The black connector will run your fan at full speed (12V), the blue connector will run the fan at medium speed (7.5V), and the white connector will run it at minimum speed (5V). However, if you opt for the white connector (minimum fan speed), be certain to design the airflow through your PC system carefully and monitor system and component temperatures. Acousti have even included four handy cable ties with each DustPROOF™ fan! The DustPROOF™ quiet fans also incorporate an Auto Start safety feature. This feature is built into the fan's PCB and automatically restarts the fan after the release of any obstacle which has prevented the blades from spinning.

<< hide info

• Dabs

• Brand:

  Acousti

• Delivery Cost:

  £4.27

120mm acoustifan case dustproof fan

AcoustiFeet Anti-Vibration Feet Black Very Soft

#Vibration-absorbing Low Profile Soft Feet **Anti-vibration Replacement Soft Feet (Pack of 4)** A great deal of PC case feet are solid plastic, or (at best) very hard rubber and therefore do a good job of transmitting unwanted vibrations from inside a PC via the chassis/case into the desk, floor or shelf on which the system sits. In this situation, where the case is in direct contact with the more info >> substrate, the PC can generate annoying noise elsewhere (secondary noise). We have designed a unique set of 4 self-adhesive soft silicone feet (UK Reg Design Applied), of varying softness (for different case weights). These case feet are designed to decouple a PC case from the floor or substrate by absorbing vibrational energy, and therefore helping to minimise noise generation caused by vibrations. A little extreme? Well, yes, perhaps: but even with the very quietest PCs it is vibration that becomes the most significant culprit/contributor to noise generation. So we have developed these case feet to try and minimise vibrations in our pursuit of 'ultimate noise reduction'. We hope you enjoy the difference! **Multiple Applications** Antivibration case feet are not just limited to combating PC noise and for vibration control in their application - they may be useful for Inkjet and Laser Printers, HiFi Separates, TVs, Small Form Factor PCs, Home Theatre PCs, and any number of appliances and enclosures that would benefit from vibration adsorption and reduction. Speaker cabinets may also be a useful application for these feet - helping to isolate the speaker cabinet from the surface on which it sits. **Available in 4 Different Softnesses:** * Light weight PC & SFF PC cases, HTPC cases, vibrating HiFi units, TV and home cable set top boxes, small speaker cabinets, inkjet printers etc. 8Kg (2.0Kg per foot) ACF3007-15B Matt Black Shore A 15° * Medium-to-light weight PCs, solid SFF cases, heavy HTPC cases, larger inkjet printers and laser printers, heav

<< hide info

• Dabs

• Brand:

  Acousti

• Delivery Cost:

  £4.27

acoustifeet anti black feet soft vibration

AcoustiFeet Anti-Vibration Feet Black Soft

#Vibration-absorbing Low Profile Soft Feet **Anti-vibration Replacement Soft Feet (Pack of 4)** A great deal of PC case feet are solid plastic, or (at best) very hard rubber and therefore do a good job of transmitting unwanted vibrations from inside a PC via the chassis/case into the desk, floor or shelf on which the system sits. In this situation, where the case is in direct contact with the more info >> substrate, the PC can generate annoying noise elsewhere (secondary noise). We have designed a unique set of 4 self-adhesive soft silicone feet (UK Reg Design Applied), of varying softness (for different case weights). These case feet are designed to decouple a PC case from the floor or substrate by absorbing vibrational energy, and therefore helping to minimise noise generation caused by vibrations. A little extreme? Well, yes, perhaps: but even with the very quietest PCs it is vibration that becomes the most significant culprit/contributor to noise generation. So we have developed these case feet to try and minimise vibrations in our pursuit of 'ultimate noise reduction'. We hope you enjoy the difference! **Multiple Applications** Antivibration case feet are not just limited to combating PC noise and for vibration control in their application - they may be useful for Inkjet and Laser Printers, HiFi Separates, TVs, Small Form Factor PCs, Home Theatre PCs, and any number of appliances and enclosures that would benefit from vibration adsorption and reduction. Speaker cabinets may also be a useful application for these feet - helping to isolate the speaker cabinet from the surface on which it sits. **Available in 4 Different Softnesses:** * Light weight PC & SFF PC cases, HTPC cases, vibrating HiFi units, TV and home cable set top boxes, small speaker cabinets, inkjet printers etc. 8Kg (2.0Kg per foot) ACF3007-15B Matt Black Shore A 15° * Medium-to-light weight PCs, solid SFF cases, heavy HTPC cases, larger inkjet printers and laser printers, heav

<< hide info

• Dabs

• Brand:

  Acousti

• Delivery Cost:

  £4.27

acoustifeet anti black feet soft vibration

AcoustiFan 120mm Anti-Vibration Fan Gasket

These super-soft silicone fan gaskets are designed to dramatically reduce the vibration from any PC or server case cooling fans. The 80mm, 92mm and 120mm sizes are 2.5mm thick. Included with each gasket are silicone washers and anti-vibration screws. These screws feature a thread design which prevents the shank touching the fan and vibrations being transmitted and amplified through to the chassis. more info >> These gaskets are suitable for the vast majority of case designs and fan combinations, as they fit standard fan mounting holes. Slightly lengthened (12mm thread) fan mounting screws are supplied with the fan gaskets and washers. These gaskets can be used with standard PC cooling fans, and not just with AcoustiFan™ quiet case fans. Note: Do not use these gaskets in very high temperature locations inside a PC/Server such as attached to CPU or GPU heat sinks! **Fitting instructions** 1.Fit the fan gasket onto the outside of the fan housing (it will stay on the fan) 2.Position the fan and gasket together against the inside of the case, so that the four mounting holes in the fan and gasket line up to the mounting holes in the case side 3.Locate the four silicone washers and screws, and fit the washers against the case side, each secured by a screw 4.Tighten the screws enough to very slightly compress the silicone rubber. Do not overtighten. **Features** 1.Help to absorb the fan vibration 2.Help to 'seal' the small gap between the fan and the casing/enclosure wall 3.Compatible with virtually all case cooling fans 4.Supplied with screws and silicone washers 5.Quick and very easy to fit

<< hide info

• Dabs

• Brand:

  Acousti

• Delivery Cost:

  £4.27

120mm acoustifan anti fan gasket vibration

AcoustiFan 80mm Anti-Vibration Fan Gasket

These super-soft silicone fan gaskets are designed to dramatically reduce the vibration from any PC or server case cooling fans. The 60 and 70mm gaskets are 1.5mm thick, and the larger sizes are 2.5mm thick. Included with each gasket are silicone washers and anti-vibration screws. These screws feature a thread design which prevents the shank touching the fan and vibrations being transmitted and amplified more info >> through to the chassis. These gaskets are suitable for the vast majority of case designs and fan combinations, as they fit standard fan mounting holes. Slightly lengthened (12mm thread) fan mounting screws are supplied with the fan gaskets and washers. These gaskets can be used with standard PC cooling fans, and not just with AcoustiFan™ quiet case fans. Note: Do not use these gaskets in very high temperature locations inside a PC/Server such as attached to CPU or GPU heat sinks! **Fitting instructions** 1.Fit the fan gasket onto the outside of the fan housing (it will stay on the fan) 2.Position the fan and gasket together against the inside of the case, so that the four mounting holes in the fan and gasket line up to the mounting holes in the case side 3.Locate the four silicone washers and screws, and fit the washers against the case side, each secured by a screw 4.Tighten the screws enough to very slightly compress the silicone rubber. Do not overtighten. **Features** 1.Help to absorb the fan vibration 2.Help to 'seal' the small gap between the fan and the casing/enclosure wall 3.Compatible with virtually all case cooling fans 4.Supplied with screws and silicone washers 5.Quick and very easy to fit

<< hide info

• Dabs

• Brand:

  Acousti

• Delivery Cost:

  £4.27

80mm acoustifan anti fan gasket vibration

Acousti Ultra-Soft Arrowhead Fan Mounts - 8 Pack

#Help to eliminate every last dB of PC noise by reducing the noise generated by fan vibrations! **Why are Fan Mounts Necessary?** Vibration from fan motors can travel into a PC case and become amplified when a fan is screwed tightly to the chassis. This unwanted noise is 'vibrational' or 'secondary', and it is an issue if you wish to build a very quiet or virtually silent PC. more info >> These mounts have been designed & uniquely produced by Acousti Products 'from the drawing-board' specifically to tackle fan-induced vibrational noise! Ultra-Soft Fan Mounts are a 'no-vibration' alternative to standard fan screws or hard plastic push pins. To prevent the transmission of vibrations from a motor (such as a fan motor), the vibrating part needs to be decoupled (or disengaged) from the chassis or case, and the vibrations need to be damped (that is, attenuated). We have selected a ultra-soft silicone polymer that effectively decouples the fan from the case, and also attenuates unwanted vibration. The 3-dimensional shape of a fan mount is intimately related to the mount material. A fan mount must be soft enough to be effective but also designed to securely hold a fan in position. Acousti Products have designed both the shape and materials together to give a widely compatible fan mount that is also the very softest and most effective available! **Why are these Mounts any better than Others?** We have chosen an ultra-soft silicone polymer because it is softer and more chemically stable than cheaper and inferior alternatives like rubber or EPDM. Cheaper alternatives can leach oils and tend to degrade more readily over time - they also tend to be more reactive with some plastics (wires etc.) than silicone. Silicone is non-toxic, more chemically stable, and can also tolerate higher temperatures - so it is a superior material for this particular use. AFM02 and AFM03B Ultra-Soft Fan Mount Design. The fan mount has been designed with smoothed corners to prevent the pr

<< hide info

• Dabs

• Brand:

  Acousti

• Delivery Cost:

  £4.27

acousti arrowhead fan mounts pack soft ultra

Cousti - Strings To Tracks

Free Delivery at hmv.com

Buy Cousti - Strings To Tracks from HMV.com for only £11.99 delivered! Cousti - Strings To Tracks is usually dispatched in 24 hours.

• Retailer:

  Hmv

cousti strings tracks

METROPLAN ECOUSTIC MATERIAL -

METROPLAN ECOUSTIC MATERIAL - CHANNEL FIX ELECTRIC SCREEN.

• Retailer:

  Insight Uk

ecoustic material metroplan

METROPLAN ECOUSTIC MATERIAL -

METROPLAN ECOUSTIC MATERIAL - CHANNEL FIX ELECTRIC SCREEN.

• Retailer:

  Insight Uk

ecoustic material metroplan

METROPLAN ECOUSTIC MATERIAL -

METROPLAN ECOUSTIC MATERIAL - CHANNEL FIX ELECTRIC SCREEN.

• Retailer:

  Insight Uk

ecoustic material metroplan

METROPLAN ECOUSTIC MATERIAL -

METROPLAN ECOUSTIC MATERIAL - CHANNEL FIX ELECTRIC SCREEN.

• Retailer:

  Insight Uk

ecoustic material metroplan

METROPLAN ECOUSTIC MATERIAL -

METROPLAN ECOUSTIC MATERIAL - CHANNEL FIX ELECTRIC SCREEN.

• Retailer:

  Insight Uk

ecoustic material metroplan

METROPLAN ECOUSTIC MATERIAL -

METROPLAN ECOUSTIC MATERIAL - CHANNEL FIX ELECTRIC SCREEN.

• Retailer:

  Insight Uk

ecoustic material metroplan

METROPLAN ECOUSTIC MATERIAL -

METROPLAN ECOUSTIC MATERIAL - CHANNEL FIX ELECTRIC SCREEN.

• Retailer:

  Insight Uk

ecoustic material metroplan

METROPLAN ECOUSTIC MATERIAL -

METROPLAN ECOUSTIC MATERIAL - CHANNEL FIX ELECTRIC SCREEN.

• Retailer:

  Insight Uk

ecoustic material metroplan

Digital Innovations AcoustiX Notebook Sound Bar

2.0 channel USB-powered notebook sound bar features 2 Watts of powerful crystal clear stereo sound. Attaches to any laptop neatly and provides a great cable management solution.• Powerful sound turns any notebook compute...

• Retailer:

  Gameseek

acoustix bar digital innovations notebook sound